Jenn-Air 720-0138-NG User Manual

 

Burner adjustments should only be performed after 
the burners have cooled.  
 
Always tighten the locking nut before relighting the 
burner 

•  If the flames have yellow tips, loosen the locking 

nut and move the bolt in a clockwise direction.    

 

•  If the flames are making excessive noise or 

lifting, loosen the locking nut and turn the bolt in 
a counter-clockwise direction.   

 

•  For questions regarding flame stability, contact 

customer service at 1-800-554-5799.  

 

 
 

 
 
 

 
 

‰ 

Specified clearance maintained 24 in. from 
combustible materials. 

 

‰ 

All internal packaging has been removed. 

 

‰ 

All the burners are factory installed. 

 

 

‰ 

The hose and regulator are properly 
connected.  

 

‰ 

The unit has been tested and is free of 
leaks. 

 

‰ 

The gas supply shut off valve has been 
located.  

 
 
 

 

 
 
 
 
 
 

 

1.  The outdoor cooking gas appliance and its individual shutoff valve must be disconnected from the 

gas supply piping system during any pressure testing of that system at test pressure in excess of ½ 
psi (3.5 kpa). 

 
2.  The outdoor cooking gas appliance must be isolated from the gas supply piping system by closing 

its individual manual shutoff valve during any pressure testing of the gas supply piping system at 
test pressures equal to or less ½ psi (3.5 kpa). 

1.  Do not store spare LP gas cylinders under or near this appliance. 

2.  Never fill the cylinder beyond 80 percent capacity. 

3.  If the information above is not followed exactly, a fire resulting in death or serious injury could occur.

 

 

15