Furuno FSV-35 User Manual

1.  HOW TO INSTALL THE SYSTEM

2. Make holes for four self-tapping screws (M5x20).
3. Peel the tape from the F mount gasket then attach the gasket to the rear of the 

control unit.

4. Connect a ground wire (1.25sq, local supply) between the ground terminal at the 

bottom of the unit and ship’s ground.

5. Set the unit to the cutout and fasten it with four self-tapping screws (M5x20) and 

wave washers.

6. Set cosmetic caps to fixing holes.

1. Fix the keyboard fixture to the bottom of the unit with the screws (M4x12) supplied.
2. Attach rubber feet (2 pcs.) to the bottom of the unit.
3. Fix the unit to the mounting location with self-tapping screws (local supply).

1. Drill four mounting holes of 5 mm diameter, referring to the outline drawing at the 

back of this manual. 

2. Fix the unit with four screws (M4) from under side of the desktop. (Supply the 

screws locally. Be sure the screws are of a sufficient length for the thickness of 
the desktop.)

Keyboard fixture

03-163-7821-1

100-306-291-10

1

Washer head screw

M4x12 C2700W MBN12

000-163-192-10

6

Rubber foot

M5x40

000-162-682-10

2

Keyboard fixture

Rubber feet