Furuno FSV-35 User Manual
1. HOW TO INSTALL THE SYSTEM
1-11
Flush mount (option)
Use the optional flush mount kit (Type: FP03-09870, Code No.: 008-535-630) to
mount the sub control unit.
mount the sub control unit.
1. Prepare a cutout in the mounting location referring to the outline drawing at the
back of this manual.
2. Set the unit to the cutout.
3. Attach the mounting plate to the unit with four screws from the rear side.
4. Screw the wing screw to each mounting plate and then insert hex bolt to each wing
3. Attach the mounting plate to the unit with four screws from the rear side.
4. Screw the wing screw to each mounting plate and then insert hex bolt to each wing
screw.
5. Fasten each wing screw and then fasten the hex nuts.
1.4
Transceiver Unit
Select a mounting location considering that the effective length of the cable between
the transceiver unit and the hull unit is 5 m (standard). The transceiver unit should be
fixed to a mounting base (shipyard supply) whose dimensions are as shown in the out-
line drawing at the back of this manual. Reinforce the transceiver unit against vibration
by stays extending from the eye-bolts on the top of the unit. Fasten four bolts (M12,
local supply) at the bottom of the transceiver unit to fix the unit to the mounting base.
the transceiver unit and the hull unit is 5 m (standard). The transceiver unit should be
fixed to a mounting base (shipyard supply) whose dimensions are as shown in the out-
line drawing at the back of this manual. Reinforce the transceiver unit against vibration
by stays extending from the eye-bolts on the top of the unit. Fasten four bolts (M12,
local supply) at the bottom of the transceiver unit to fix the unit to the mounting base.
Name
Type
Code No.
Qty
Mounting plate
03-163-7531
100-306-261
4
Hex nut
M5
000-863-108
4
Wing screw
M5x40
000-162-682-10
4
Pan head screw
M4x12
000-163-192-10
4
(75'
/#+059
%*#4)'
18'44
$8'44