Furuno FSV-35 User Manual

2.  WIRING

Connect the 3 phase power cable and the transceiver unit cable (10S2078) as shown 
below.

Confirm that the LED lights in red after the wiring is completed. If the LED does not 
light, turn off power cable from the mains switchboard, reconnect any two lines of the 
power cable, turn on the power, and check if the LED lights. The hull unit does not 
work when the connection is wrong.

Normal phase: LED lights in red.
Phase reversal: LED does not light.

Fabricate the power cable as shown below.

CN-C101

TB-C101

Connect the power cable to this terminal board.

LED (red)

For detection of phase reversal on 3 phase power cable

Connect the transceiver 
cable (10S2078) here.

Cable (10S2078) from 
transceiver unit

Power cable 
(TPYCY-4)

Armor

Anticorrosive 
sheath

100 

25

20

Set armor in 
clamp.

Vinyl sheath

FV5.5-4

M4 (YEL) x 3

Sheath

Vinyl 
sheath

Conductor 
S=4mm

2

 

φ=2.55 mm

φ=16.9 mm