Sony PCS-1P User Manual
2-5
PCS-1/1P
(RS-232C cross cable)
PCS-1/1P
Personal computer
ON LINE
POWER
LAN ALERT
2-4. Operation Log
PCS1/1P has a function that outputs the internal processing history, between the connection and
disconnection of a line, to the commercial PC connected to the outside and a function that saves the latest
disconnection of a line, to the commercial PC connected to the outside and a function that saves the latest
history of 1M byte in a Memory Stick (refer to the saving of system log on page 2-18).
Operation log using commercial PC (1)
Connect an AUX CONTROL terminal and PC to the right on the front panel of PCS-1/1P.
Start the power of PCS-1/1P and PC.
Activate accessory software “Hyper Terminal” of PC Windows 95/98/2000/XP on PC and set the
communication format as described below.
communication format as described below.
Transmission rate: 38,400 bps
Data length:
8 bits
Stop bits:
2 bits
Parity bit:
None
The procedure for “Hyper Terminal” activation, communication format setting, and operation log
execution is described on the next page and later.
execution is described on the next page and later.
. Windows is the registered trademark of Microsoft Corporation.
. For Windows 2000/XP, the procedure is “Start menu”
. For Windows 2000/XP, the procedure is “Start menu”
→
“Program”
→
“Accessories”
→
“Communications”
→
“Hyper Terminal”.
Note: In a hyper terminal, only 500 lines can be logged. For long-time logging, use other terminal
emulators.