Yamaha Z150B User Manual
E
3-22
UP
DN
UP
DN
702014
403035*
DN
UP
702042**
EMU00294*
PROCEDURE FOR TILTING UP
Power trim/tilt model
1)
If there is a fuel joint or a fuel cock on
the boat, disconnect the fuel line or
close the fuel cock.
the boat, disconnect the fuel line or
close the fuel cock.
2)
Push the power trim/tilt switch “UP”
until the outboard has tilted up com-
pletely.
until the outboard has tilted up com-
pletely.
3)
Turn the tilt-support lever toward you
and support the engine.
and support the engine.
w
After tilting the engine, be sure to sup-
port it with the tilt-support lever.
Otherwise, the engine could fall back
down suddenly if oil in the power
trim/tilt unit should lose pressure.
port it with the tilt-support lever.
Otherwise, the engine could fall back
down suddenly if oil in the power
trim/tilt unit should lose pressure.
4)
Once the engine is supported with the
tilt-support lever, push the power
trim/tilt switch DOWN to retract the
trim rods.
tilt-support lever, push the power
trim/tilt switch DOWN to retract the
trim rods.
c
C
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growths and corrosion
which could damage the power trim/tilt
mechanism.
ly during mooring. This protects the rods
from marine growths and corrosion
which could damage the power trim/tilt
mechanism.
411043
68F-9-14-3 2/28/02 12:00 PM Page 23