Yamaha Z150B User Manual
E
3-23
EMU00316
CRUISING IN OTHER
CONDITIONS
CRUISING IN SALT WATER
After operating in salt water, wash out the
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits.
NOTE:
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits.
NOTE:
Refer to cooling system flushing instruc-
tions in “TRANSPORTING AND STORING
OUTBOARD MOTOR”.
tions in “TRANSPORTING AND STORING
OUTBOARD MOTOR”.
CRUISING IN TURBID WATER
It is strongly recommended that the
optional chromium-plated water-pump kit
be installed if the outboard is to be used
in turbid (muddy) water conditions.
optional chromium-plated water-pump kit
be installed if the outboard is to be used
in turbid (muddy) water conditions.
EMU00303
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1)
Push the power trim/tilt switch “UP”
until the engine is supported by the
tilt rod.
until the engine is supported by the
tilt rod.
2)
Release the tilt-support lever.
3)
Push the power trim/tilt switch “DN”
(Down) to lower the engine to the
desired position.
(Down) to lower the engine to the
desired position.
411045
68F-9-14-3 2/28/02 12:00 PM Page 24