Sharp KB-3401L User Manual

Page of 40
1
beFOre OperatinG
before operating your new range make sure you read and 
understand this operation manual completely.
•  before the range can be used, follow these steps:
1
 Plug in the range. The Microwave Drawer display will 
show 
WAIT
 for 30 seconds, then 
ENJOY
 
YOUR
 
RANGE
 
TOUCH
 
CLEAR
 
AND
 
TOUCH
 
CLOCK
.
2
 Touch the Stop/Clear pad. 
:
 will appear.
3
 Set clock.
Note: 
•  Please  do  not  open  or  close  the  lower  oven  door  for                   
30 seconds after plugged in.
tO set tHe ClOCk
1
 Touch Timer/Clock pad and number 2.
2
 Touch number pads for correct time of day and touch 
Timer/Clock pad again.
This is a 12 hour clock. If you attempt to enter an incorrect 
clock time,  
ERROR
 will appear in the display. Touch the 
Stop/Clear pad and re-enter the time.
•  If  the  electrical  power  supply  to  your  range  should 
be  interrupted,  the  display  will  intermittently  show              
WAIT
 for 30 seconds, then 
ENJOY
 
YOUR
 
RANGE
 
TOUCH
 
CLEAR
 
AND
 
TOUCH
 
CLOCK
 
 
after the power 
is reinstated. If this occurs during cooking, the program will 
be erased. The time of day will also be erased. Simply touch 
Stop/Clear pad and reset the clock for the correct time of 
day.
Note: 
•  The  Microwave  Drawer  can  be  programmed  with                   
the  drawer  open  except  for  START/Minute  Plus.
The Oven can be started with the door open except for 
self-cleaning.
tiMers
Your  Insight  Range  features  two  separate  independent 
Kitchen Timers.  
The timer on the Oven side (left) of the control panel is   
labeled Timer/Hold to Clear/3 Min Plus. The maximum 
length of this timer is 9 hours, 99 minutes. You set this timer
in hours and minutes. For example, one hour 30 minutes 
is entered as 130. 1:30 will appear. For times over one hour, 
the time will count down in hours and minutes. When the 
timer reaches 60 minutes, the timer will begin counting down 
in minutes and seconds. To cancel Timer/Hold to Clear/
3 Min Plus, you must touch and hold the Timer/Hold to
Clear/3 Min Plus pad for 3 seconds.
The timer on the Microwave side (right) of the control panel 
is labeled Timer/Clock.  The maximum length of this timer 
is 99 minutes, 99 seconds. This timer is set in minutes and
seconds.   It will always count down in minutes and seconds.  
To cancel this timer, simply touch Stop/Clear.
See page 21.
stOp/Clear
Touch the Stop/Clear pad to:
1
 Erase if you make a mistake during programming.
2
 Cancel timer on Microwave side.
3
 Stop the Oven or Microwave Drawer temporarily during 
timed cooking.
4
 Return the time of day to the display.
5
 Cancel a program during cooking, touch twice for timed 
cooking.
Microwave
oven