West Bend 7 User Manual

Page of 36
 
To prevent electrical shock, personal injury or property damage, read and 
follow all instructions and warnings.
 
 
 
 
 
 
 
 
E
LECTRICITY 
P
RECAUTIONS
 
 
 
To protect against electric shock, do not immerse cord, plugs, or other electric 
parts in water or other liquids. 
 
Do not operate any appliance with a damaged cord or plug.  
 
Do not use this appliance outdoors. 
 
Do not plug cord into wall outlet unless crockery cooker is set in OFF position. 
 
Always turn control to OFF and unplug the appliance from outlet when not in use 
and before cleaning.  Allow to cool before putting on or taking off parts. 
 
Caution: Risk of electric shock. Cook only in removable cooking vessel; do not 
attempt to cook directly in the heating base. 
 
A short power-supply cord is provided to reduce risks resulting from becoming 
entangled in or tripping over a longer cord. 
 
Longer detachable power-supply cords or extension cords are available and 
may be used if care is exercised in their use.  While use of an extension cord is 
not recommended, if you must use one, the marked electrical rating of the 
detachable power-supply cord or extension cord should be at least as great as 
the electrical rating of the appliance.  If the appliance is of the grounded type, 
the extension cord should be a grounding-type 3-wire cord.  The cord should be 
arranged so that it will not drape over the counter top or tabletop where it can be 
pulled by children or tripped over. 
 
This appliance has a polarized plug (one blade is wider than the other).  To 
reduce the risk of electric shock, this plug is intended to fit into a polarized outlet 
only one way.  If the plug does not fit fully into the outlet, reverse the plug.  If it 
still does not fit, contact a qualified electrician.  Do not attempt to modify the plug 
in any way. 
 
Do not use an outlet or extension cord if the plug fits loosely or if the outlet or 
extension cord feels hot. 
 
Keep the cord away from hot parts of the appliance and hot surfaces during 
operation.