Hoshizaki KML-200MAE User Guide

48

1. HOSHIZAKI recommends cleaning this unit at least once a year.  More

frequent cleaning, however, may be required in some existing water
conditions.

2. To prevent injury to individuals and damage to the icemaker, do not use

ammonia type cleaners.

3. Always wear liquid-proof gloves for safe handling of the cleaning and

sanitizing solution.  This will prevent irritation in case the solution contacts
with skin.

1) Dilute approximately 10.5 fl. oz. of recommended cleaner Hoshizaki “Scale Away” or

“LIME-A-WAY,” (Economics Laboratory, Inc.) with 2 gal. of water.

2) Remove all ice from the Evaporator and the Storage Bin.

Note:   To remove cubes on the Evaporator, turn off the power supply and turn it on

after 3 minutes.  The defrost cycle starts and the cubes will be removed from
the Evaporator.

3) Turn off the power supply.

4) Remove the Front Panel.

5) Place the Control Switch in the “SERVICE” position.  Then place the Service Switch

in the “DRAIN” position.

6) Replace the Front Panel and turn on the power supply for 2 minutes.

7) Turn off the power supply.

8) Remove the Front Panel and then remove the Insulation Panel by lifting up the panel
    slightly and pulling it toward you.

9) Pour the cleaning solution into the Water Tank.

10) Move the Service Switch to the “WASH” position.