Hoshizaki KML-200MAE User Guide

50

1) Dilute IMS-II Sanitizer or a 5.25% Sodium Hypochlorite solution with water (Add
    1.0 fl. oz. to 2 gal. of water).

  Note:  IMS-II Sanitizer, Part #SA0004, is available through your Hoshizaki Dealer.

2) Remove the Insulation Panel.

3) Pour the sanitizing solution into the Water Tank.

4) Move the Service Switch to the “WASH” position.

5) Replace the Insulation Panel and the Front Panel in their correct position.

6) Turn on the power supply and start the sanitizing process.

7) Turn off the power supply after 15 minutes.

8) Remove the Front Panel.

9) Move the Service Switch to the “DRAIN” position.

10) Replace the Front Panel and turn on the power supply for 2 minutes.

11) Turn off the power supply.

12) Remove the Front Panel.

13) Repeat the above steps 18) through 31) in “CLEANING PROCEDURE” two times to
            rinse thoroughly.

14) Move the Control Switch to the “ICE” position.

15) Replace the Front Panel in its correct position.

16) Clean the Storage Bin with water.

17) Turn on the power supply and start the automatic icemaking process.