Hoshizaki KMD-901MRH User Manual

11

1. This icemaker is not intended for outdoor use. Normal operating ambient 

temperature should be within +45°F to +100°F (+7°C to +38°C); Normal 
operating water temperature should be within +45°F to +90°F (+7°C to 
+3°C). Operation of the icemaker, for extended periods, outside of these 
normal temperature ranges may affect icemaker performance.

. This icemaker will not work at sub-freezing temperatures. To prevent damage 

to the water supply line, drain the icemaker if the air temperature is going to 
go below 3°F (0°C). See "III.C. Preparing the Icemaker for Long Storage."

For best operating results:
• Icemaker should not be located next to ovens, grills, or other high heat producing 

equipment.

• Avoid choosing a site where no dripping is allowed.
• Allow 6" (15 cm) clearance at rear, sides, and top for proper air circulation and ease of 

maintenance and/or service should they be required.

• Location should provide a firm and level foundation for the equipment.

1) If mounting the unit on top of a storage bin, unpack the storage bin, and attach the four 

adjustable legs provided (bin accessory) to the bottom of the storage bin. If mounting 
the unit on top of a dispenser, follow the dispenser's setup procedure.

) Position the storage bin/dispenser unit in the selected permanent location.
3) Place the icemaker on top of the storage bin/dispenser unit.
4) Secure the icemaker to the storage bin/dispenser unit using the two mounting brackets 

and the bolts provided. See Fig. .

5) Level the icemaker and storage bin/dispenser unit in both the left-to-right and front-to-

rear directions. If using a storage bin, adjust the storage bin legs to make the icemaker 
level.

6) Replace the panels in their correct positions.

Icemaker

Mounting 
Bracket

Bolt

Bin

Icemaker

Mounting 
Bracket

 

Bolt

Dispenser