Panasonic NE1258R User Manual

Page of 32
- 11 -
How to Operate
D. PROGRAMMING DOUBLE OR TRIPLE QUANTITY PAD
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCk IS ACTIVATED! (SEE PAGE 11-12)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example:  To program 1.5 times of heating time for double quantity into Number/Memory pad “5”
PAD
INSTRUCTION
DIGITAL DISPLAY WINDOW
1
keep the door closed.
Digital Display Window must be blank.
 
2
PROG
Press Prog pad.
“PROG” will start to blink.
 
PROG 
3
5
Press Number/Memory pad “5”.
The selected pad number will appear and currently programmed 
 
information will be indicated.
PROG 
1
HI
4
x
 2
Press Double Quantity pad.
The currently programmed magnification number will appear.
 
Note:   1.6 times is preset at factory.
PROG 
5
1
5
Press Number/Memory pads “1” and “5” for 1.5 times.
The programmed magnification number will appear. 
 
If pad 5 is programmed for 3 minutes, the time for the double quantity 
will be 4 minutes and 30 seconds. 
Available range is 0.1-5.0 times.
PROG 
6
PROG
Press Prog pad.
“PROG” will stop blinking. 
 
This means that you have completed programming.
PROG 
•  Three seconds later, Digital Display Window will go blank.
Note:
•   If you want to program your desired magnification number for triple quantity, repeat as above, using Triple
Quantity pad instead of Double Quantity pad.
E. PROGRAM LOCk
To Activate Program Lock:
 
X
Example:  To program cooking at DEFROST power for 1 minute into Number/Memory pad “5”
PAD
INSTRUCTION
DIGITAL DISPLAY WINDOW
1
keep the door closed.
Digital Display Window must be blank.
 
2
PROG
Press Prog pad until “PROG”, “P” and “L” appear. (more than five 
seconds)
“PROG”, “P” and “L” will appear.
 
PROG 
In Program Lock mode:
•  The oven is started by pressing the desired Number/Memory pad. There is no need to press Start pad.
•  Opening the door cancels the remaining time on the program.
•  The oven can not be programmed or run manually until the program lock is released.