Panasonic NE1258R User Manual

X

The oven lamp will turn on, and “0” will appear.

 

“PROG” and “P” will appear.

 

•  Oven reverts to a two-touch operating mode (Number/Memory pad + Start pad).

•  Repeat and interrupt feature are operational.

•  Number/Memory pads can be programmed.

•  Tone loudness control and length control are operational.

The loudness of beep tone and the length of beep tone 
at the end of heating cycle can be set.
There are four levels of the loudness. The level is 
indicated by a number followed by the word “bEEP”.

3bEEP = loudest 
2bEEP = middle 
1bEEP = quietest 
0bEEP = silent

There are two options of the length of beep tone at the 
end of heating cycle. The length is indicated by 1 st or 
2 nd Stage Heating Indicator.

1 = 3 beeps 
2 = short beeps for 60 seconds

The loudest level and 3 beeps are preset at the factory.

X

The oven lamp will turn on and “0” will appear.

 

The tone will sound at its loudness level and the loudness level “3” 

 

followed by the word “bEEP” will appear. “PROG” will start to blink and 
1st Stage Heating Indicator “1” (the length of beep tone “3 beeps”) will 
be indicated.

Note:   Repeating to press the pad “0” will lower the loudness all the way 

to silent. (3 bEEP –– loudest, 2 bEEP –– middle,  
1 bEEP –– quietest, and 0 bEEP –– silent)

“PROG” will stop blinking. That means that you have completed 

 

program. 
Three seconds later, “0” will appear.

•  Close the door. One minute later, Digital Display Window will go blank.