Multi-Tech Systems MVP2400 User Manual
MultiVOIP User Guide
Overview
13
T1 LED Descriptions
The descriptions below apply to all digital T1 MultiVOIP units.
MVP2400/2410 Front Panel LED Definitions
MVP2400/2410 Front Panel LED Definitions
LED NAME
DESCRIPTION
Power
Indicates presence of power.
Boot
After power up, the Boot LED will be on for about 10
seconds while the MVP2400/2410 is booting.
seconds while the MVP2400/2410 is booting.
RCV
Receive. Lights when receiving data on Ethernet
port.
port.
XMT
Transmit. Lights when transmitting data on
Ethernet port.
Ethernet port.
LNK
Link. When lit, VOIP “sees” the hub or network
via the Ethernet connection.
via the Ethernet connection.
COL
Collision. Lit when data collisions occur.
T1
When lit, indicates presence of T1 connection.
E1
E1. Not supported.
PRI
PRI. On if T1 line is of ISDN-Primary-Rate type.
ONL
Online. This LED is on when frame
synchronization has been established on the
T1/E1 link.
synchronization has been established on the
T1/E1 link.
IC
IC LED is on when Internal Clocking is selected in
T1/E1 configuration.
T1/E1 configuration.
LC
Indicates Loss of Carrier.
LS
Indicates Loss of Signal.
Test
For testing purposes only.