Multi-Tech Systems MVP2400 User Manual

  

 

(one set on each MultiVOIP model)

Indicates presence of power.

After power up, the Boot LED will be on briefly while the
MultiVOIP is booting.  It lights whenever the MultiVOIP is
booting or downloading a setup configuration data set.

. Receive.  Lights (blinks) when receiving data on

Ethernet port.

. Transmit.  Lights (blinks) when transmitting

data on Ethernet port. ..

. Link.  When lit, VOIP “sees” the hub or network

via the Ethernet connection. ..

. Collision.  Lit when data collisions occur. ..

Channel-Operation LEDs  (one set for each channel)

.  This indicator blinks when voice packets

are being transmitted to the local area network.

.    This indicator blinks when voice packets

are being received from the local area network.  

.  This indicator lights when the FXS-

configured channel is off-hook, the FXO-configured
channel is receiving a ring from the Telco, or the M
lead is active on the E&M configured channel.  That is,
it lights when the MultiVOIP is receiving a ring from
the PBX.

.   This indicator lights when the FXS-

configured channel is ringing, the FXO-configured
channel has taken the line off-hook, or the E lead is
active on the E&M-configured channel.