Multi-Tech Systems MVP2400 User Manual
MultiVOIP User Guide
Technical Configuration (Digital Voips)
90
T1 Telephony Parameters (for MVP2400 & MVP2410)
The following parameters must be known about the PBX or telco
central office equipment to which the T1 MultiVOIP will connect:
central office equipment to which the T1 MultiVOIP will connect:
➼ T1 Phone Parameters
Ask phone company or
PBX maintainer.
PBX maintainer.
Info needed to operate:
MVP2400
MVP2410
MVP2410
T1 Telephony Parameters:
Record for this VOIP Site
Record for this VOIP Site
@
•
Which frame format is used?
ESF
___ or
D4
___
•
Which CAS or PRI protocol is used? ______________
•
Clocking: Does the PBX or telco switch use
internal
or
external
clocking? _________________
Note that the setting used in the voip unit will be the
opposite of the setting used by the telco/PBX.
opposite of the setting used by the telco/PBX.
•
Which line coding is used?
AMI
___ or
B8ZS
___
Write down the values for these T1 parameters. You will need to enter
these values in the “T1/E1 Parameters” screen in the Configuration
section of the MultiVOIP software.
these values in the “T1/E1 Parameters” screen in the Configuration
section of the MultiVOIP software.