Black Box 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU User Manual
724-746-5500 | blackbox.com
Page 31
Remote console operation
NOTE: The passwords for a local console session of the LB510A-R2 (near-end) and
the remote console session of the LB510A-R2 (far-end) should be different for the pur-
pose of security.
the remote console session of the LB510A-R2 (far-end) should be different for the pur-
pose of security.
7. You should now be logged into the remote LB510A-R2 (far-end) via the remote
console session. The communication with the remote LB510A-R2 (far-end) is
essentially the same as having a local console connection.
essentially the same as having a local console connection.
NOTE: The local or remote LB510A-R2 may be CO or CPE, as long as there is one of
each. Either the CO or CPE unit may accept a remote console connection.
each. Either the CO or CPE unit may accept a remote console connection.
NOTE: With a remote console session open, a user at PC (far-end) is blocked from
using the local console. Upon typing anything, the LB510A-R2 (far-end) sends a mes-
sage to the PC (far-end) stating Console: Remote console connection is open.
using the local console. Upon typing anything, the LB510A-R2 (far-end) sends a mes-
sage to the PC (far-end) stating Console: Remote console connection is open.
Figure 10 is a screenshot of opening a typical remote console session:
Figure 11.
Opening a typical remote console session