Bay Technical Associates DS2-RPC User Manual

Select R), “Rename user”, from the User Management Menu, the DS unit responds: 

 

 

 

Enter the number that corresponds to the user to be renamed, followed by <cr>. The DS unit responds: 

 

 

 

The DS Series redisplays the User Management Menu with the renamed user. 

Select “Change Outlet Name” from the main menu to set or change the name of the receptacles. The 
following status menu appears: 

 

 

Enter the number of the outlet you want to change. If you want to change the name of Outlet 4, type 
the number 4 at the “Enter Request” prompt, followed by <cr>. The DS responds: 

 

 

 

Type ‘N’ to keep the same name, or type ‘Y’ to change the name.  

 

Enter a new receptacle name (maximum field length, 16 characters), followed by <cr>. If you want to 
change the name of Receptacle 4 from Outlet 4 to Router 1, type Router 1 from the “Enter” prompt, 
followed by <cr>. The DS responds with the outlet name menu displaying the new name to Outlet 4: 

If the enable/disable feature is disabled, the DS will not ask to confirm the command. 
From the configuration menu, select “Enable/Disable Confirmation.” 
Depending on the current status of the switch, the DS responds with the option to change the current 
status. Default is Enabled. 

 

Select “Enable/Disable Status Menu.” from the configuration menu, to enable the Status menu. 
The DS responds with the option to change the current status: 

 

 

 

Enter user number to rename: 

Enter user name: