GarrettCom Magnum 6K32T User Manual

Magnum 6K32 & 6K32T Managed Switch                 Installation and User Guide (12/05) 

 

32 

.

.

Looking down into the 

Magnum 6K32T unit, notice that 

there are individual PM 

installation spaces and female 

latch (white) connectors 

provided on the far right side of 

main board along with four 

stand-off’s for 6KPM card 

position. (See Figure 3.5.1c). 

cover 

There are one PM slot located on the front-right side of the chassis cover. Looking into 

the vertical placed Chassis cover of the unit, there are one bracket with retaining screws 

(#256 flat head ) which hold the PM Face plate card slot securely. These six screws 

shown in the picture below are used to secure a PM face plate in position, but unscrew 

only four of the screws as shown in Fig. below. These screws are also used to secure the 

individual 6KPM cards screen plate which can be subjected to significant forces from the 

attached cables.  (See Figure 3.5.1d) 

 

Up to four front-mounted 6KPM cards may be installed in one Magnum 

6K32T Managed Switch unit. Follow these steps to install a 6KPM. 

Step 1.  Remove top chassis cover. See procedure in Section 3.5.1 above.