3com 4500 PWR 26-PORT User Manual

C

HAPTER

 11: U

SING

 AAA 

AND

 RADIUS C

OMMANDS

Use the

command to enable centralized 

MAC address authentication event debugging. Use the 

command to disable event debugging.

To enable centralized MAC address authentication event debugging, enter the 
following:

<4500>debugging mac-authentication event

display mac-authentication [ interface interface-list ]

Any view

 Ethernet interface list including several Ethernet 

interfaces, expressed in the format 

interface-list = { interface-num [ to 

interface-num ] } & < 1-10 >

. 

 specifies a single Ethernet 

interface in the format 

interface-num = { interface-type interface-num | 

interface-name }

, where 

 specifies the interface type, 

 specifies the interface number and 

 specifies the 

interface name. For the respective meanings and value ranges, see the parameters 
in the Port Command chapter.

Use the 

 command to display the global 

information on centralized MAC address authentication, including centralized 
MAC address authentication features, value of each current timer, number of 
online users, the MAC address in silent periods, and the authentication status of 
the MAC address on each interface.

Display the global information of centralized MAC address authentication

<4500>display mac-authentication

mac address authentication is Enabled.

authentication mode is UsernameAsMacAddress

the Fixed username is mac

the Fixed password is NULL

         offline detect period is 300s

         quiet period is 1 minute

         server response timeout value  is 100s

         max allowed user number is 1024

         current user number amounts to  0

         current domain:

Silent Mac User info:

         MAC ADDR               From Port           Port Index

Ethernet1/0/1 is link-up

  MAC address authentication  is Disabled

  Authenticate success: 0, failed: 0

  Current online user number is 0