3com 4500 PWR 26-PORT User Manual

interface-type interface-num | interface-name }

, where 

 

specifies the port type,

 specifies the port number and 

 specifies the port name. For the respective meanings and value 

ranges, read the Parameter of the Port Configuration section. 

Use the 

 command to reset the statistics of 802.1x. 

This command can be used to re-perform statistics if the user wants to delete the 
former statistics of 802.1x. 

When the original statistics are cleared, if no port type or port number is specified, 
the global 802.1x statistics of the Switch and 802.1x statistics on all the ports will 
be cleared. If the port type and port number are specified, the 802.1x statistics on 
the specified port will be cleared. 

Related commands: 

.

Clear the 802.1x statistics on Ethernet 1/0/2. 

<4500>reset dot1x statistics interface ethernet 1/0/2

User View

None