DELL PC7024 User Manual
512
IP Addressing Commands
Example
Configure ipv6 routing on vlan 10 and obtain an address via DHCP. Assumes
vlan 10 already exists.
console(config)#ip routing
console(config)#interface vlan 10
console(config-if-vlan10)#ipv6 enable
console(config-if-vlan10)#ipv6 address dhcp
Configure a default gateway on vlan 10
console(config)#no ipv6 address autoconfig
console(config)#no ipv6 address 2003::6/64
console(config)#no ipv6 address 2001::/64 eui64
console(config)#no ipv6 address
ipv6 address (OOB Port)
Use the ipv6 address command in Interface (out-of-band) Config mode to set
the IPv6 prefix on the out-of-band port. If the prefix is specified, the address
will be configured using the prefix and length A link local address in EUI-64
format may also be assigned.
The autoconfig parameter specifies that a link local address in the EUI-64
The autoconfig parameter specifies that a link local address in the EUI-64
format is assigned to the interface.
The DHCP parameter indicates that the port should obtain its address va
The DHCP parameter indicates that the port should obtain its address va
DHCP.
2CSPC4.XCT-SWUM2XX1.book Page 512 Monday, October 3, 2011 11:05 AM