3com TR User Manual

The Switch 2000 TR fits a standard 19-inch data com-
munications rack typically found in wiring closets.

Unpack the Switch 2000 TR and place it on a hard, 
flat surface.

Position one of the enclosed mounting brackets over 
the mounting holes and attach. See Figure 2-3.

Figure 2-3   Rack Mounting the Switch 2000 TR

Repeat the process for the second bracket.

Insert the Switch 2000 TR in the rack and secure it 
with suitable screws (not included). Be sure to allow 
for adequate ventilation.

The Switch 2000 TR can be mounted to a wall with 
the enclosed brackets. Be sure that the wall is suitable 

for mounting the unit. A flat, smooth surface that is 
dry and sturdy is best.

Unpack the Switch 2000 TR and place on a hard, flat 
surface.

Position one of the enclosed mounting brackets over 
the mounting holes and attach. See Figure 2-4.

Figure 2-4   Wall Mounting the Switch 2000 TR

Repeat the process for the second bracket.

Mount the Switch 2000 TR to the wall. Be sure to 
allow for adequate ventilation.

The Switch 2000 TR can be stacked with other com-
ponents of the SuperStack system using the four 
enclosed self-adhesive rubber pads. Apply the rubber 
adhesive pads to the underside of the unit. Stack the 
units, ensuring that the pads of the upper unit sit in 
the recesses in the cover of the lower unit.