3com TR User Manual

C

HAPTER

 4: C

ONFIGURING

 

WITH

 

THE

 VT100 I

NTERFACE

At the bottom of the TR Port Setup screen, select 
BRIDGE. The Port Bridge Setup screen appears. See 
Figure 4-6.

Figure 4-6   Port Bridge Setup Screen

In the Attached LAN ID field, enter the LAN ID in hex.

From the STE Mode field, select *Auto-Span*.

Select OK. Repeat for all ports as desired.

Log on to the Switch 2000 TR.

From the Main Menu, select Switch Management.

Press [Space Bar] and select *Bridge*.

Select SETUP. The TR Bridge Setup screen appears. 

In the Bridge Type field, select *Source-route only* by 
toggling the [Space Bar].

In the Spanning Tree Support field, select *IBM*. The 
BPDU value is automatically assigned: 
C0-00-00-00-01-00

Assign a Bridge Number. Enter in Hex from 0 to F.

In the Max Age field, type 6.

In the Forward Delay field, type 4.

Select OK.

In the TR Management screen, press [Space Bar] until 
*Port* appears. Select SETUP. The TR Port Setup 
screen appears.

At the bottom of the TR Port Setup screen, select 
BRIDGE. The TR Port Bridge Setup screen appears.

In the attached Lan Id field, enter a LAN ID in hex 
(0-FFF).

In the STE Mode field, select *Auto-span*.

Select OK. Repeat for all ports as desired.

switch. Refer to “Resetting the Switch 2000 TR in 
Chapter 3 for instructions.

Log on to the Switch 2000 TR.

From the Main Menu, select Switch Management.

Press [Space Bar] and select *Bridge*. The TR Bridge 
Setup screen appears.

In the Bridge Type field, select *Transparent-only*.