3com TR User Manual
4-6
C
HAPTER
4: C
ONFIGURING
WITH
THE
VT100 I
NTERFACE
Port Configuration
The Port configuration section includes directions for
configuring ports of the Switch 2000 TR, including:
configuring ports of the Switch 2000 TR, including:
■
Admin State
■
VLAN ID
■
Port Personality
■
Internal Priority
■
Congestion Control
■
Token Priority
■
Speed
■
Forwarding Mode
■
Cut-Thru Threshold%
■
Locally Administered Address
■
Broadcast Storm Control
■
Port Bridge Settings
■
Spanning Tree Fields
NOTE:
All settings in the Port Setup screens are “live”
settings. They take effect immediately unless other-
wise noted.
wise noted.
For more information on the port, refer to “Port Sta-
tistics in Chapter 6.
tistics in Chapter 6.
Setting Up Ports
1
Log on to the Switch 2000 TR.
2
Select Switch Management from the Main Menu.
3
Press [Space Bar] and select *Port*.
4
Enter the desired port and unit ID.
5
Select SETUP. The TR Port Setup screen appears.
Figure 4-7 TR Port Setup Screen
Setting the Port Admin. State
Use the Admin. State field to enable or disable indi-
vidual ports.
vidual ports.
1
Set this field by toggling the [Space Bar].
2
Press [Return].
Setting VLAN ID
The VLAN ID field allows you to assign ports to a
VLAN (workgroup) which can only communicate with
other ports in the same VLAN. You have the ability to
assign ports to up to 15 separate VLANS. VLANs are
VLAN (workgroup) which can only communicate with
other ports in the same VLAN. You have the ability to
assign ports to up to 15 separate VLANS. VLANs are