Cabletron Systems 6E133-25 User Manual
Switch Configuration Screen
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
5-65
3.
Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
the screen.
4.
Press ENTER. The message “SAVED OK” is displayed.
5.18.2
Setting the Age Time
To set the Age Time, proceed as follows:
1.
Use the arrow keys to highlight the Age Time field.
2.
Enter the desired Age Time in increments of 10. The available Age
Time range is 10 seconds to 1,000,000 seconds with the default value
being 300 seconds.
Time range is 10 seconds to 1,000,000 seconds with the default value
being 300 seconds.
3.
Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
the screen.
4.
Press ENTER. The message “SAVED OK” is displayed.
5.18.3
Setting (Enabling or Disabling) the Port Status
To set the status of an interface (port), proceed as follows:
1.
Use the arrow keys to highlight the Status field of the port.
2.
Use the SPACE bar to toggle to either ENABLED or DISABLED.
3.
Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
the screen.
4.
Press ENTER. The message “SAVED OK” is displayed.
NOTE
Disabling the port status of a backplane connection will block
the module from passing user traffic to the applicable module
slot in the 6C105 chassis. SNMP and other management traffic
(e.g., ping and Telnet traffic), however, will still pass via the
backplane to the applicable module slot.
the module from passing user traffic to the applicable module
slot in the 6C105 chassis. SNMP and other management traffic
(e.g., ping and Telnet traffic), however, will still pass via the
backplane to the applicable module slot.