Cabletron Systems 2M46 User Manual

Chapter 2: LM Security Screens for 2E43-51/2E43-51R Devices

The following section defines the fields on the Port Level Security 
Configuration screen.

Port (Read-only)

Lists the repeater ports on the ENET interface connector (ENET 1 
through 4) selected in the INTERFACE # field. Refer to 

ENET/repeater port relationship on the device.

Security State (Selectable)

Used to select the security state of each repeater port on the connector for 
frames received. The states are as follows:

NonSecure – Allows the ports on the connector to receive all frames. 
The source address of received frames is not examined and the frames 
are processed in a non secure state. 

The last source address detected is displayed in the address column. 
This provides a quick and easy way to see what address belongs to 
what port.

ENET 1 = Repeater ports 1 – 12

ENET 3 = Repeater ports 25 – 36

ENET 2 = Repeater ports 13 – 24

ENET 4 = Repeater ports 37 – 48

             

 Port

                           

Security State

                       

Action On Intruder       

                       Address

               1     

               2                        [NonSecure]   

 

         

          

               3                        [LockedOnAddr]

               4                        [LockOnNext]

               5                        [NonSecure]   

 

    

        

           

               6                        [NonSecure]         

  

           

               7                        [NonSecure]   

 

     

       

           

               8                        [NonSecure]           

           

               9                        [NonSecure] 

           

             10                        [NonSecure]

 

           

             11                        [NonSecure]

           

             12                        [NonSecure] 

           

            SAVE                              INTERFACE #:  [1]                 

27462_113w