DELL N3000 User Manual

Configuring Connectivity Fault Management

In the following example, the switch at the customer site is part of a Metro 

Ethernet network that is bridged to remote sites through a provider network. 

A service VLAN (SVID 200) identifies a particular set of customer traffic on 

the provider network.

To configure the switch:

1 Enable CFM globally on the switch, and then create a level-6 management 

domain named CustDom for end-to-end CFM on the Metro Ethernet 

network. VLAN 200 is associated with this domain.

console#config

console(config)#ethernet cfm enable

console(config)#ethernet cfm domain CustDom level 6

console(config-cfm-mdomain)#service vlan vlan 200

console(config-cfm-mdomain)#exit