Panasonic FZG1AABACRM User Manual

37

n

The screen is disor-

dered.

l

  Changing the number of display colors and resolution may affect 

the screen. Restart the computer.

l

  Connecting/disconnecting an external display may affect the 

screen. Restart the computer. Under factory default settings, the 

brightness of the display screen will adjust automatically based 

on the ambient light detected by the ambient light sensor. You can 

adjust the settings for this sensor (è page 25).

During Simultaneous 

display, one of the 

screens becomes disor-

dered.

l

  When using the Extended Desktop, use the same display colors for 

the external display as those used by the LCD. If you continue to 

experience problems, try changing the display.  

Long touch on the desktop, and touch [Graphics Properties...] - 

[Display].

l

  Simultaneous display cannot be used until Windows startup is com-

plete (during Setup Utility, etc.).

The external display 

does not work normally.

l

  If the external display does not support the power saving function, 

it may not work normally when the computer enters the power sav-

ing mode. Turn off the external display.

Cannot rotate the dis-

play.

l

  The application program currently running may not support the 

image rotation. Quit the program, and then try to rotate the image. 

This can ameliorate the status.

l

  When the automatic rotation is off, screen display does not rotate 

automatically.

n

The pointer does not 

work.

l

  When using the external mouse, connect it correctly.

l

  Restart the computer using the external keyboard/mouse. 

l

  If the computer does not respond to external keyboard/mouse com-

mands, read “No response” (è page 38).

Cannot point the cor-

rect position using the 

included digitizer pen.

l

  Perform the screen calibration (è 

 Reference Manual “Screen 

Input Operation” ).

l

  Use the included pen.

l

  On the Windows logon screen or the Welcome screen, you may 

not be able to point the correct position using the included digitizer 

pen. Use the external keyboard or the external mouse to log on.

l

  You may not be able to point the correct position using your finger

after resuming from sleep or hibernation while the display is rotated.

If this is the case, proceed as follows. 
A

 

 

1. On the Start screen, flick from bottom side to inside of the

screen, and touch [All apps] on the toolbar. 

 

2.  Touch [Run] under “Windows System”, input [c:\util\resset\res-

set.exe] and touch [OK]. 

 

 

 Touch   

 (Start) and input “c:\util\resset\resset.exe” in [Search 

programs and files], then press

Enter. 

B

  Touch [Yes] on the [User Account Control] screen. 

C

  Select [Disabled] and touch [OK]. 

D

  Touch [Yes] when you are prompted to restart the computer.

CPE02725ZA_FZ-G1mk1_8_7_OI_E.indb   37

2013/02/07   10:31:22