Samsung SRP - 350 User Manual

15 

Chapter 3. The self test 

 

The self-test checks whether the printer has any problems. If the printer does not function 

properly, contact your dealer. The self-test checks the following; 

 

1.  Make sure paper roll has been installed properly. 
2.  Turn on the power while holding down the FEED button. The self-test begins.

 

3.  The self-test prints the current printer status, which provides the control ROM version 

 

 and the DIP switch setting.

 

4.  After printing the current printer status, self-test printing will print the following, and  
  pause (The PAPER LED light blinks).                                        

 

 

 

 

 

5.  Press the FEED button to continue printing. The printer prints a pattern using the  
 built-in character set. 
6.  The self-test automatically ends and cuts the paper after printing the following. 

 

     The printer is ready to receive data as soon as it completes the self-test.