Lexmark X940e User Manual

<none>

Specifies a custom name for the Standard Bin

<none>

Specifies a custom name for Bin 1

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar
options, such as support for duplex printing and printing multiple pages on one sheet.

Inches

Millimeters

Identifies the units of measure

Inches is the US factory default setting.

Millimeters is the international factory default setting.

3–48 inches

76–1219 mm

Sets the portrait width

If the width exceeds the maximum, the printer uses the maximum
width allowed.

12 inches is the US factory default setting. Inches can be
increased in 0.01-inch increments.

305 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.

3–48 inches

76–1219 mm

Sets the portrait height

If the height exceeds the maximum, the printer uses the
maximum height allowed.

19 inches is the US factory default setting. Inches can be
increased in 0.01-inch increments.

483 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.

Short Edge

Long Edge

Specifies the feed direction

Short Edge is the factory default setting.

Long Edge appears only if the longest edge is shorter than the
maximum length supported in the tray.