Lexmark X940e User Manual

The printer is ready to receive print jobs.

The printer has received an entire fax job. Wait for the message to clear.

The printer receives page <n> of the fax job, where <n> is the number of the page received. Wait for the message
to clear.

The printer settings are being configured. Wait for the message to clear.

Warning: Do not turn the printer power off while Remote Management Active appears on the display.

Output bins have reached their capacity. Remove paper from all output bins to clear the message and continue
printing.

The standard exit bin has reached its capacity. Remove paper from the standard exit bin to clear the message and
continue printing.

The specified output bin has reached its capacity. Remove paper from the specified bin to clear the message and
continue printing.

One or more messages which interrupted a scan job are now cleared. Replace the original documents in the scanner
to restart the scan job.

Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the
message.

Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from
the ADF immediately after the last successfully scanned page.

Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass (flatbed)
immediately after the last successfully scanned page.

Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully
scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail,
or FTP.

Touch Restart job if job recovery is active and the job is restartable. The message clears. A new scan job
containing the same parameters as the previous job starts.

Wait for the message to clear.

Touch Continue to restore all held jobs stored on the printer hard disk.

Touch Do not restore if you do not want any print jobs to be restored.