Xerox 3124 User Guide

Using Windows PostScript Driver (Phaser 3125/B, 3125/N only)

25

If you want to use the PostScript driver provided with your 
system CD-ROM to print a document.
PPDs, in combination with the PostScript driver, access printer 
features and allow the computer to communicate with the 
printer. An installation program for the PPDs is provided on the 
supplied software CD-ROM. 
This chapter includes:

You can use the printer properties window, which allows you to 
access all of the printer options you need when using your 
printer. When the printer properties are displayed, you can 
review and change the settings needed for your print job. 
Your printer properties window may differ, depending on your 
operating system. This Software User’s Guide shows the 
Properties window for Windows XP.
Your printer driver Properties window that appears in this 
User’s Guide may differ depending on the printer in use.

:

• Most Windows applications will override settings you specify 

in the printer driver. Change all print settings available in the 

software application first, and change any remaining settings 

using the printer driver. 

• The settings you change remain in effect only while you are 

using the current program. To make your changes 

permanent, make them in the Printers folder. 

• The following procedure is for Windows XP. For other 

Windows OS, refer to the corresponding Windows User's 

Guide or online help.
1. Click the Windows 

Start button.

2. Select Printers and Faxes.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select 

Printing Preferences.

5. Change the settings on each tab, click OK.

You can use advanced settings by clicking the 

 

button.

 

• Paper/Output this option allows you to select the size of the 

paper loaded in the tray.

• Graphic this option allows you to adjust the print quality for 

your specific printing needs.

• Document Options this options allow you to set the PostScript 

options or printer features.

You can click 

 from the upper right corner of the window, and 

then click on any setting.