Xerox C20 User Manual

❖

Your Xerox printer and supplies were designed and tested 
to meet strict safety requirements. These include safety 
agency examination, approval, and compliance with 
established environmental standards.

Your attention to the following safety guidelines will help 
to ensure the continued safe operation of your printer.

• Use the material and supplies specifically designed for 

your printer. The use of unsuitable materials may result 
in poor performance and possibly a hazardous 
situation.

• Follow all warnings and instructions marked on, or 

supplied with, the printer.

• Place the printer in a dust free area where the 

temperature range is 50° F to 90° F (10° C to 32° C) and 
the relative humidity is 15% to 85%.

• Choose a location for the printer allowing sufficient 

space around the printer for operation and 
maintenance. The minimum recommended room size 
is 353 cubic ft. (10 cubic meters) or approximately 8 ft. 
x 8 ft. x 8 ft. (242 cm x 242 cm x 242 cm). 

• Place the printer in an area where there is adequate 

space for ventilation and servicing. The recommended 
minimal spacing is 10 in. (25 cm) behind the printer, 
10 in. (25 cm) on either side of the printer, and 24 in. 
(61 cm) in front of the printer.