Xerox C20 User Manual
Printer Memory
Appendix C: Printer Options
❖
C-5
Accessing the System
Board from the Front
To install or remove memory, you must access the printer
system board which is under the input tray. Follow these
steps:
system board which is under the input tray. Follow these
steps:
1
Unplug the printer power cord.
2
Disconnect all cables from the back of the printer.
3
Remove the input tray and output bin unit.
A
Grasp underneath the unit, and pull up hard to a 45°
angle until it releases from the printer.
angle until it releases from the printer.
B
Hold the unit at this angle and pull it away from the
printer.
printer.
4
Remove the system board access cover.
A
Locate the tab on the access cover and push it toward
the printer.
the printer.
B
Grasp the tab and lift the access cover until it touches
the metal bar.
the metal bar.
C
Pull the access cover straight out from the printer.
5
Continue with the section “Installing Printer Memory” on
the next page.
the next page.