Epson 1080 User Manual

Making Detailed Adjustments

3. Do one of the following:

■

Select 

Reset Lamp Hours 

to clear the lamp usage timer and reset it to zero. 

You should reset the lamp timer only when you install a new projector lamp. See 
page 52 for more information.

■

Select 

Reset Memory

 to clear all memory settings.

■

Select 

Reset All 

to return all projector settings to their original defaults (except 

Component, Save Memory, Language, and Lamp).

Use the settings in this section to adjust the image size and position, suppress on-screen text, 
and select basic setup options.

Before adjusting any of these settings, make sure you have already selected an appropriate 
aspect ratio for the type of picture you’re viewing (see page 28). 

■ Output Scaling

For component video formats, this setting lets you see the edges of the image that are not 
normally visible in the picture (see page 63). 

■ Position

Use the arrow buttons to fine-tune the position of the image on the screen.

■ Zoom Caption Pos.

Lets you adjust the shape and position of the image so that subtitles are visible (available 
only if the aspect ratio has been set to Zoom). Use 

Zoom Size

 to adjust the proportions 

of the image, and 

Zoom Caption Pos. 

to move the image up or down. You can adjust 

output scaling before zoom position.

■

Aspect

This setting lets you change the aspect ratio of your image, and works the same as 
pressing the 

Aspect

 button on the remote control. See page 28 for more information.

Signal > Output Scaling

Signal > Position

Signal > Zoom Caption Pos.

Signal > Aspect

PowerLite Home Cinema 1080.book  Page 43  Tuesday, February 5, 2008  4:46 PM