Epson 1080 User Manual
44
Making Detailed Adjustments
Screen Options
■ Messages
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
■ Startup Screen
Turn this setting off if you want to prevent the startup screen from appearing while the
projector is warming up.
projector is warming up.
■ Display Background
Changes the screen that’s used when the projector is not receiving a signal or when you
press the
press the
Blank
button to temporarily stop projection.
Other Setup Options
■ Projection
You can select different options for projecting the image:
Front
,
Front/Ceiling
,
Rear
,
Rear/Ceiling
.
■ Direct Power On
Sets projection to start when the main power switch is turned on, without pressing the
On
button on the remote control or the P
Power
button on the projector.
Note: When direct power on is enabled, power surges that occur after a power outage can
cause the projector to turn on.
cause the projector to turn on.
■ Video Signal
Leave this setting on
Auto
so the projector can automatically interpret the format, such as
NTSC or PAL (for standard TV formats).
Settings > Display > Messages
Settings > Display > Startup Screen
Settings > Display > Display Background
Settings > Projection
Settings > Direct Power On
Settings > Input Signal > Video Signal
PowerLite Home Cinema 1080.book Page 44 Tuesday, February 5, 2008 4:46 PM