Sony VPL-EW7 User Manual

20

Connecting the Projector

• Be sure to use the HDMI cable with an 

HDMI logo.

• The HDMI connector of this projector is not 

compatible with DSD (Direct Stream 
Digital) Signal or CEC (Consumer 
Electronics control) Signal.

This section describes how to connect the 
projector to a VCR. 
For more information, refer to the 
instruction manuals of the equipment you 
are connecting. 

1

Stereo audio connecting cable (not supplied)

 

(Use a no-resistance cable.)

2

Video cable (not supplied) or S-Video cable 
(not supplied)

For stereo audio connection, connect the stereo 
audio connecting cable to following 
connectors:
VPL-EX70/EX7: AUDIO INPUT connector
VPL-EW7: VIDEO IN AUDIO connector

1

Signal Cable (not supplied)
HD D-sub 15-pin (male) 

↔ 3 × phono jack 

2

Stereo audio connecting cable (not supplied)

 

(Use a no-resistance cable.)

• For stereo audio connection, connect the 

stereo audio connecting cable to following 
connectors:

VPL-EX70/EX7: AUDIO INPUT connector
VPL-EW7: INPUT A AUDIO connector

• Set the aspect ratio using “Aspect” on the 

INPUT SETTING menu according to the 
input signal.

VCR

to S 
video 
output

to audio 
output (R)

to video 
output

to audio

output (L)

VCR

to video 
GBR/
component 
output

to audio 
output (R)

to 
audio 
output 
(L)