Sony VPL-EW7 User Manual

22

Projecting

The ?/1 key lights in red and the 
projector goes into standby mode. 

Press the ?/1 key.

The ?/1 key lights after flashing in 
green. (The projector cannot be used 
while the ?/1 key is flashing.)

Turn on the equipment connected to 
the projector.

Press the INPUT key to select the 
input source.

Each time you press the key, the input 
signal switches as follows:

Smart APA (Auto Pixel Alignment) 
adjusts the picture of the connected 
equipment so that it is projected clearly.

• If “Auto Input Search” is set to “On,” the 

projector searches for the signals from 
the connected equipment and displays 
the input channel where the input signals 
are found.

• The Smart APA feature is effective for 

the input analog signal from a computer 
only.

Switch the equipment connected to 
output to the projector.

Depending on the type of your 
computer, for example a notebook, or an 
all-in-one LCD type, you may have to 
switch the computer to output to the 
projector by pressing certain keys (e.g., 

, etc.), or by changing 

your computer’s settings.

The key used for switching the computer to 
output to the projector varies depending on 
the type of computer.

Adjust the upper or lower position of 
the picture.

Use the adjuster to adjust the picture 
position. 

Using the adjuster
Lift the projector while pressing the 
adjuster adjustment button, and adjust 
the tilt of the projector, then release the 
button to lock the adjuster.

• Be careful not to let the projector down 

on your fingers.

Computer/Component 
connected to the INPUT 
A connector

Input-A

Computer connected to 
the INPUT B connector
(VPL-EX70 only)

Input-B

Computer/VCR, etc. 
connected to INPUT B 
(Digital) connector 
(VPL-EW7 only)

Video equipment 
connected to the VIDEO 
input connector

Video

Video equipment 
connected to the 
S VIDEO input 
connector

S-Video

Input-A   

t    Input-B   t Video t S-Video

(VPL-EX70/EW7 only)

VGA

LCD 

/

/

,

or

and

Adjuster adjustment button