ZyXEL Communications P-334W User Manual

Page of 496
Prestige 334W User’s Guide 
Introducing the Web Configurator 
 
          2-1 
Chapter 2 
Introducing the Web Configurator 
This chapter describes how to access the Prestige web configurator and provides an overview of its 
screens. 
2.1  Web Configurator Overview 
The embedded web configurator allows you to manage the Prestige from anywhere through a browser such 
as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and later or Netscape 
Navigator 7.0 and later versions with JavaScript enabled. It is recommended that you set your screen 
resolution to 1024 by 768 pixels. The screens you see in the web configurator may vary somewhat from the 
ones shown in this document due to differences between individual Prestige models or firmware versions. 
2.2  Accessing the Prestige Web Configurator 
Step 1. 
Make sure your Prestige hardware is properly connected and prepare your computer/computer 
network to connect to the Prestige (refer to the Quick Start Guide). 
Step 2. 
Launch your web browser. 
Step 3. 
Type "192.168.1.1" as the URL. 
Step 4. 
Type "1234" (default) as the password and click Login. In some versions, the default password 
appears automatically - if this is the case, click Login.  
Step 5. 
You should see a screen asking you to change your password (highly recommended) as shown 
next. Type a new password (and retype it to confirm) and click Apply or click Ignore
 
 
Figure 2-1 Change Password Screen