ZyXEL Communications P-334W User Manual
Prestige 334W User’s Guide
2-2
Introducing the Web Configurator
Step 6.
You should now see the MAIN MENU screen (see Figure 2-2).
The management session automatically times out when the time period set in the
Administrator Inactivity Timer field expires (default five minutes). Simply log back into
the Prestige if this happens to you.
2.3 Resetting the Prestige
If you forget your password or cannot access the web configurator, you will need to use the RESET button at
the back of the Prestige to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously and the password will be reset to “1234”.
the back of the Prestige to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously and the password will be reset to “1234”.
2.3.1
Procedure To Use The Reset Button
Make sure the PWR LED is on (not blinking) before you begin this procedure.
Step 1.
Make sure the PWR LED is on (not blinking).
Step 2.
Press the RESET button for ten seconds or until the PWR LED begins to blink and then release
it. When the PWR LED begins to blink, the defaults have been restored and the Prestige restarts.
it. When the PWR LED begins to blink, the defaults have been restored and the Prestige restarts.