Q-Logic 6140 User Manual
B – Configuring CHAP
Configuring CHAP Using the GUI
FI0154601-00 C
B-7
A
15. Select Chap Login Information.
16. Type the secret (secret_initiator) that you created in
into Target
Secret.
17. Select Mutual Authentication.
18. Click OK.
19. Click OK. The initiator completes normal login.
GUI—Normal Session—Uni-directional CHAP
To program single-direction CHAP during a normal session:
1.
Do not enable CHAP on the iSCSI presented target.
2.
Check to see if the initiator exists on the discovered iSCSI initiators list:
If the initiator is not part of the discovered iSCSI initiators list, then
open the Wizard menu and select Add Initiator Wizard.
open the Wizard menu and select Add Initiator Wizard.
If the initiator is part of the discovered list, then skip to
.
3.
Fill in the IQN name string.
4.
Select Enable Chap.
5.
Create a CHAP secret (for example, secret_initiator).
6.
Go to the MS Initiator and perform the following steps:
a.
Click Targets.
b.
Select the target you want to login to.
c.
Click Log On.
d.
Click Advanced.
e.
Click Chap Login Information.
f.
into Target
Secret,
g.
Click OK.
7.
Click OK. The initiator completes normal login.