Gateway 2701 User Manual

Appendix A: Install the Gateway on Other Operating Systems

Verify that “Connect Via: 2Wire USB Remote NDIS…” is selected to set the network adapter as active.

10.

Click

Save

to complete your installation.

11.

Configuring the Internet Connection

Now that your first computer is connected to the gateway, you need to configure your gateway to
communicate with your Internet service provider.

To activate your Internet account:

Open your Internet browser.

Type http://gateway.2wire.net/setup into the browser’s address line.

When prompted to enter a key code, enter the key code provided by your Internet service in the key
code field, and click

Select your Local Time Zone and click

You may be prompted to enter service provider information such as username and password. Enter any
required service provider information and click

The connection process will begin. During this process the

INTERNET

light on the front of the gateway

will first blink green then turn solid green. This step could take up to five minutes as the gateway
searches for your broadband service.

The gateway will now connect to the Internet. This process may take several minutes. If the registration
screen opens, click the

button and complete the 2Wire registration process.