TP-LINK 1910010350 User Manual

 

-64- 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

) 

1) 

When the trigger connection is released, the according opening ports will be closed. 

2) 

Each rule allowed to be used only by one host on LAN synchronously. The trigger 

connection of other hosts on LAN will be refused. 

3) 

Incoming Port Range cannot overlap each other. 

Choose menu “Forwarding→DMZ”, you can view and configure DMZ host in the screen 

(shown in Figure 4-41).The DMZ host feature allows one local host to be exposed to the 

Internet for a special-purpose service such as Internet gaming or videoconferencing. DMZ host 

forwards all the ports at the same time. Any PC whose port is being forwarded must have its 

DHCP client function disabled and should have a new static IP Address assigned to it because 

its IP Address may be changed when using the DHCP function. 

 

Figure 4-41  DMZ 

1. Click 

the 

Enable radio button 

2.  Enter the local host IP Address in the DMZ Host IP Address field 

3. Click 

the 

Save button. 

) 

After you set the DMZ host, the firewall related to the host will not work.

 

Choose menu “Forwarding→UPnP”, you can view the information about UPnP(Universal Plug 

and Play) in the screen (shown in Figure 4-42).The UPnP feature allows the devices, such as 

Internet computers, to access the local host resources or devices as needed. UPnP devices 

can be automatically discovered by the UPnP service application on the LAN.