Multi-Tech Systems MT3410ZLX User Manual
MultiMobile Owner’s Manual
60
For example, type:
ATH0<Enter>
to hang up the modem connection,
or
AT&K3<Enter> to enable bi-directional CTS/RTS
hardware flow control.
Most of the AT commands can be entered in
“strings” (i.e., on the same command line) without
spaces between the individual commands. For
example:
“strings” (i.e., on the same command line) without
spaces between the individual commands. For
example:
AT&K3H0<Enter>
As shown above, it is not necessary to put spaces
between the commands. So, there are no spaces
between
between the commands. So, there are no spaces
between
AT, &K3, and H0.
The modem usually returns a response (or “Result
Code”) at the next line if it understands the
command. The response is usually
Code”) at the next line if it understands the
command. The response is usually
OK or ERROR
unless the AT command provides other (extended)
messages.
messages.
Basic AT Commands
Command
Options Function & Description
A/
Re-execute the last command string
<any key>
Terminate the current connection
attempt when entered in handshaking
state
attempt when entered in handshaking
state
All the following commands require an “AT” prefix
A
Go off-hook and attempt to establish a
connection without waiting for a ring
connection without waiting for a ring
Bn
Line modulation options
B0
Select ITU-T V.22 mode for 1200 bps
connection and V.21mode for 300 bps
connection and V.21mode for 300 bps