Multi-Tech Systems MT3410ZLX User Manual
MultiMobile Owner’s Manual
62
Command
Options Function & Description
En
AT command echo options
E0
Echo disabled
E1*
Echo enabled
Hn
Switch-hook control
H0
Modem goes on-hook
H1
Modem goes off-hook
Mn
Speaker control
M0
Speaker always off
M1 *
Speaker on until carrier present
M2
Speaker always on
M3
Speaker off during dialing and on until
carrier present
carrier present
Nn
Select negotiate handshake
N0
When originating or answering,
handshake only at the communication
rate specified by S37 register and
“ATBn” and no fallback
handshake only at the communication
rate specified by S37 register and
“ATBn” and no fallback
N1 *
When originating or answering, start
handshaking only at the
communication standard specified by
S37 register and “ATBn” During
handshake, fallback to a lower speed
may occur except in “AT\N1” mode
handshaking only at the
communication standard specified by
S37 register and “ATBn” During
handshake, fallback to a lower speed
may occur except in “AT\N1” mode
On
Go on-line
O0
Return modem to a previously
established state
established state
O1
Begin an equalizer retrain sequence,
then return to on-line state
then return to on-line state
O3 to O14
Force modem to a new rate that is
user defined. New rates are defined in
S62 register
user defined. New rates are defined in
S62 register
P
Enable pulse dialing
Qn
Result code display options
Q0 *
Result code enabled
* Factory default setting