ZyXEL Communications G-220 v3 User Manual

ZyXEL G-220 v3 User’s Guide

Chapter 5 Access Point Mode Configuration

79

The MAC Filter screen allows you to configure the G-220 v3 to give exclusive access to 
(Accept) devices or exclude devices from (Reject) connecting to the G-220 v3. The MAC 
address is assigned at the factory and consists of six pairs of hexadecimal characters, for 
example, 00:A0:C5:00:00:02. You need to know the MAC address of the device(s) to 
configure this screen.

Key x (where x is a 

number between 1 

and 4)

Select this option if you want to manually enter the WEP keys.
Enter the WEP key in the field provided.
If you select 64 Bits in the WEP field.

Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 

example, 11AA22BB33) for HEX key type
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 

(for example, MyKey) for ASCII key type.

If you select 128 Bits in the WEP field,

Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 

example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 

(for example, MyKey12345678) for ASCII key type.

If you select 256 Bits in the WEP field, 

Enter either 58 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for 

example, 

0000111122223333444455556666777788889999AAAABBBBCCCC000011) 

for HEX key type 
or 
Enter 29 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" 

(for example, MyKey111122223333444455556678) for ASCII key type.

Note: The values for the WEP keys must be set up exactly the 

same on all wireless devices in the same wireless LAN.

ASCII WEP keys are case sensitive.

Save

Click Save to save the changes.

Cancel

Click Cancel to discard the changes.

Table 17   Access Point Mode: Configuration  (continued)