ZyXEL Communications G-220 v3 User Manual
ZyXEL G-220 v3 User’s Guide
80
Chapter 5 Access Point Mode Configuration
Figure 50 Access Point Mode: MAC Filter
The following table describes the labels in this screen.
Table 18 Access Point Mode: MAC Filter
LABEL
DESCRIPTION
Filter Type
Define the filter action for the list of MAC addresses in the MAC address filter table.
Select Disable to deactivate the MAC filter feature.
Select Reject to block access to the G-220 v3, MAC addresses not listed will be
Select Disable to deactivate the MAC filter feature.
Select Reject to block access to the G-220 v3, MAC addresses not listed will be
allowed to access the G-220 v3.
Select Accept to permit access to the G-220 v3, MAC addresses not listed will be
Select Accept to permit access to the G-220 v3, MAC addresses not listed will be
denied access to the G-220 v3.
Filter MAC
Address 1-16
Specify the MAC address(es) of the wireless station(s) that is allowed or denied
association to the G-220 v3.
Enter six pairs of hexadecimal digits (separated by colons) in the range of “A-F”,
Enter six pairs of hexadecimal digits (separated by colons) in the range of “A-F”,
“a-f” and “0-9” (for example, 00:A0:C5:00:00:02).
If you enter an invalid MAC address, once you click Save to save the values, a
If you enter an invalid MAC address, once you click Save to save the values, a
warning screen will be displayed.
Save
Click Save to save the changes back to the G-220 v3.
Cancel
Click Cancel to discard the changes.