Corinex Global GameNet User Manual

To connect the Corinex AV200 Powerline Ethernet Wall Mount F to your computer, 
follow the steps listed below.

  1. Once the security configuration and synchronization have been completed
 

  the adapters may be unplugged and taken to the respective places in the home

     where the computers will be connected to them.
  2. Connect the supplied Ethernet cable to the Ethernet (LAN) port on the wall
    mount, and to an Ethernet port on your computer.
 3. 

Plug 

the 

Corinex AV200 Powerline Ethernet Wall Mount F unit directly

    into any standard electrical outlet.

Note: The Corinex AV200 Powerline Ethernet Wall Mount F should be plugged 
directly into a wall outlet, not into a power strip or surge suppressor. Power 
strips and surge suppressors can weaken or block the Powerline network 
signal.

Standards Compliance IEEE 

802.3u 

Up to 200 Mbps on physical layer 

AC Plug Type 

US, EU, UK and AUS 

LED Status Lights VPI, 

ETH 

Interface 

10/100BaseT Fast Ethernet, Powerline 

Frequency Range used 

2 – 34 MHz 

Power Input 

85 to 265 V AC, 50/60 Hz 

Dimensions 

132 mm L x 60 mm W x 65 mm H 

Transmitted Power spectral density -56 dBm/Hz 
Power Consumption 5W 
Safety & EMI 

UL/EN 60950, FCC Part 15, EN 55022 
EMC limits